OBD-II Transmission Codes | © shbox.com | ||
DTC | Description | DTC type * | Default Action |
P0502 | Vehicle Speed Sensor (VSS)
-Low Input |
A | *
DTC P502 will be stored in PCM history * Second gear only * Maximum line pressure * Freeze shift adapts from being updated * Inhibit TCC engagement |
P0560 | System Voltage Malfunction | D | *DTC
P0560 will be stored in PCM history *All transmission output devices are off *Freeze 1-2 shift adapts from being updated |
P0712 | Transmission
Fluid Temperature (TFT) Sensor Circuit -Low Input (high temperature indicated) |
B | *DTC
P0712 will be stored in PCM history *Transmission default temperature will be 135ºC (275ºF) *Freeze 1-2 shift adapts from being updated |
P0713 | Transmission
Fluid Temperature (TFT) Sensor Circuit -High Input (low temperature indicated) |
B | *DTC
P0713 will be stored in PCM history *Transmission default temperature will be 135ºC (275ºF) *Freeze 1-2 shift adapts from being updated |
P0719 | Brake Switch Circuit - Low Input | D | *DTC P0719 will be stored in PCM history |
P0724 | Brake Switch Circuit - High Input | D | *DTC
P0719 will be stored in PCM history *Freeze 1-2 shift adapts from being updated |
P0742 | Torque Converter Clutch (TCC) stuck ON | A | *DTC
P0742 will be stored in PCM history *Freeze 1-2 shift adapts from being updated |
P0748 | Pressure Control Solenoid (PCS) Circuit - Electrical | D | *DTC
P0748 will be stored in PCM history *Freeze 1-2 shift adapts from being updated |
P0751 | 1-2 Shift Solenoid - Performance | B | *DTC P0751 will be stored in PCM history |
P0753 | 1-2 Shift Solenoid - Electrical | A | *DTC
P0753 will be stored in PCM history *Maximum line pressure *If in hot mode, force TCC on in 3rd and 4th gear when brake not applied and downshift not requested *Inhibit downshifts to 2nd when speed is greater than 30 mph *Freeze 1-2 shift adapts from being updated |
P0756 | 2-3 Shift Solenoid - Performance | B | *DTC P0756 will be stored in PCM history |
P0758 | 2-3 Shift Solenoid - Electrical | A | *DTC
P0758 will be stored in PCM history *Third gear only *Freeze 1-2 shift adapts from being updated *Maximum line pressure *Inhibit TCC engagement |
P1810 | Pressure Switch Assembly (PSA) Circuit Malfunction | B | *DTC
P1810 will be stored in PCM history *D2 line pressure *D4 shift pattern *Freeze 1-2 shift adapts from being updated |
P1812 | Transmission Fluid Overtemperature | D | *DTC
P1812 will be stored in PCM history *Freeze 1-2 shift adapts from being updated |
P1860 | TCC PWM Solenoid Circuit - Electrical | A | *DTC
P1860 will be stored in PCM history *Inhibit TCC engagement *Inhibit 4th gear if in hot mode *Freeze 1-2 shift adapts from being updated |
P1864 | TCC Solenoid Circuit - Electrical | A | *DTC
P1864 will be stored in PCM history *Inhibit TCC engagement *Inhibit 4th gear if in hot mode *Freeze 1-2 shift adapts from being updated *Maximum line pressure |
P1870 | Transmission Component Slipping | A | *DTC
P1870 will be stored in PCM history *Inhibit TCC engagement *Inhibit 4th gear if in hot mode *Freeze 1-2 shift adapts from being updated *Maximum line pressure |
P1886 | 3-2 Control Solenoid Circuit - Electrical | A | *DTC
P1886 will be stored in PCM history *Soft landing into 3rd gear *Inhibit TCC engagement *Freeze 1-2 shift adapts from being updated *Maximum line pressure *TCC engaged in 4th |
* DTC types | |||
A | Emission related, will turn on the MIL after first failure | ||
B | Emission related, will turn on the MIL after two consecutive trips with failure | ||
C | Non-emissions related, will turn on the MIL on first failure | ||
D | Non-emissions related, no lamp |